CVE-2019-0154

Public on

Last Modified: UTC

Moderate Moderate Impact What does this mean?
6.5 CVSS v3 Base Score

Description

A flaw was found in Intel graphics hardware (GPU) where a local attacker with the ability to issue an ioctl could trigger a hardware level crash if MMIO registers were read while the graphics card was in a low-power state. This creates a denial of service situation and the GPU and connected displays will remain unusable until a reboot occurs.

Statement

Intel plans to release BIOS firmware to correct this issue. Red Hat's kernel update should mitigate this vulnerability. Some older hardware will not have BIOS firmware update and will rely on operating system level protection to prevent access while the device is in low-power states. For more information see https://access.redhat.com/solutions/i915-graphics

Mitigation

Preventing loading of the i915 kernel module will prevent attackers from using this exploit against the system however the power management functionality of the card will be disabled and the system may draw additional power. See this KCS article (https://access.redhat.com/solutions/41278) for instructions on how to disable a kernel module. Graphical displays may also be at low resolution or not work correctly. This mitigation may not be suitable if running graphical tools locally is required.

Additional Information

External References

Content from www.cve.org is not included.https://www.cve.org/CVERecord?id=CVE-2019-0154

Content from nvd.nist.gov is not included.https://nvd.nist.gov/vuln/detail/CVE-2019-0154

https://access.redhat.com/solutions/i915-graphics

Content from www.intel.com is not included.https://www.intel.com/content/www/us/en/security-center/advisory/intel-sa-00260.html

Affected Packages and Issued Red Hat Security Errata

Products / Services Components State Errata
Red Hat Enterprise Linux 5 kernel Will not fix
Red Hat Enterprise Linux 6 kernel Fixed RHSA-2019:3836
Red Hat Enterprise Linux 7 kernel Fixed RHSA-2019:3834
Red Hat Enterprise Linux 7 kernel-rt Fixed RHSA-2019:3835
Red Hat Enterprise Linux 7 kernel-alt Not affected
Red Hat Enterprise Linux 7.2 Advanced Update Support kernel Fixed RHSA-2019:3841
Red Hat Enterprise Linux 7.2 Telco Extended Update Support kernel Fixed RHSA-2019:3841
Red Hat Enterprise Linux 7.2 Update Services for SAP Solutions kernel Fixed RHSA-2019:3841
Red Hat Enterprise Linux 7.3 Advanced Update Support kernel Fixed RHSA-2019:3840
Red Hat Enterprise Linux 7.3 Telco Extended Update Support kernel Fixed RHSA-2019:3840
Unless explicitly stated as not affected, all previous versions of packages in any minor update stream of a product listed here should be assumed vulnerable, although may not have been subject to full analysis.

Common Vulnerability Scoring System (CVSS) Score Details

Important note

CVSS scores for open source components depend on vendor-specific factors (e.g. version or build chain). Therefore, Red Hat's score and impact rating can be different from NVD and other vendors. Red Hat remains the authoritative CVE Naming Authorities (CNA) source for its products and services (see Red Hat classifications ).

CVSS v3 Score Breakdown Red Hat NVD
CVSS v3 Base Score 6.5 5.5
Attack Vector Local Local
Attack Complexity Low Low
Privileges Required Low Low
User Interaction None None
Scope Changed Unchanged
Confidentiality Impact None None
Integrity Impact None None
Availability Impact High High

CVSS v3 Vector

Red Hat CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H

NVD CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Acknowledgements

Red Hat would like to thank Intel for reporting this issue.

Frequently Asked Questions

Why is Red Hat's CVSS v3 score or Impact different from other vendors?

 For open source software shipped by multiple vendors, the CVSS base scores may vary for each vendor's version depending on the version they ship, how they ship it, the platform, and even how the software is compiled. This makes scoring of vulnerabilities difficult for third-party vulnerability databases such as NVD that only provide a single CVSS base score for each vulnerability. Red Hat scores reflect how a vulnerability affects our products specifically.

For more information, see https://access.redhat.com/solutions/762393.

My product is listed as "Under investigation" or "Affected", when will Red Hat release a fix for this vulnerability?
  • "Under investigation" doesn't necessarily mean that the product is affected by this vulnerability. It only means that our Analysis Team is still working on determining whether the product is affected and how it is affected.
  • "Affected" means that our Analysis Team has determined that this product is affected by this vulnerability and might release a fix to address this in the near future.

What can I do if my product is listed as "Will not fix"?

 A "will not fix" status means that a fix for an affected product version is not planned or not possible due to complexity, which may create additional risk.

Available options depend mostly on the Impact of the vulnerability and the current Life Cycle phase of your product. Overall, you have the following options:
  • Upgrade to a supported product version that includes a fix for this vulnerability (recommended).
  • Apply a mitigation (if one exists).
  • Open a This content is not included.support case to request a prioritization of releasing a fix for this vulnerability.

What can I do if my product is listed as "Fix deferred"?

 A deferred status means that a fix for an affected product version is not guaranteed due to higher-priority development work.

Available options depend mostly on the Impact of the vulnerability and the current Life Cycle phase of your product. Overall, you have the following options:
  • Apply a mitigation (if one exists).
  • Open a This content is not included.support case to request a prioritization of releasing a fix for this vulnerability.
  • Red Hat Engineering focuses on addressing high-priority issues based on their complexity or limited lifecycle support. Therefore, lower-priority issues will not receive immediate fixes.

What is a mitigation?

 A mitigation is an action that can be taken to reduce the impact of a security vulnerability, without deploying any fixes.

I have a Red Hat product but it is not in the above list, is it affected?

 The listed products were found to include one or more of the components that this vulnerability affects. These products underwent a thorough evaluation to determine their affectedness by this vulnerability. Note that layered products (such as container-based offerings) that consume affected components from any of the products listed in this table may be affected and are not represented.

Why is my security scanner reporting my product as vulnerable to this vulnerability even though my product version is fixed or not affected?

 In order to maintain code stability and compatibility, Red Hat usually does not rebase packages to entirely new versions. Instead, we backport fixes and new features to an older version of the package we distribute. This can result in some security scanners that only consider the package version to report the package as vulnerable. To avoid this, we suggest that you use an approved vulnerability scanner from our This content is not included.Red Hat Vulnerability Scanner Certification program.