Consolidated Troubleshooting Article for Virt-who and Virtual Datacenter (VDC) Subscriptions Issues
Updated
Table of Contents
- Virtual Datacenter (VDC) Subscriptions
- Virt-who - General
- Virt-who in a VMware ESXi environment
- Virt-who in a Red Hat Virtualization (RHV) Environment
- Virt-who in a Microsoft Hyper-V environment
- Virt-who in a Nutanix AHV Environment
- Virt-who in a KVM Environment
- Related Topics
Virtual Datacenter (VDC) Subscriptions
Issues
- Unable to subscribe RHEL 9 Virtual Machine with Red Hat Enterprise Linux for Virtual Datacenters subscription
- auto attach does not attach VDC subscription after VM is migrated to another host
- Activation Key for VDC with zero subscription does not attach properly if custom subscriptions are added in Red Hat Satellite 6.
- Register content host using activation key failed to attach Red Hat Enterprise Linux for Virtual Datacenters subscription
How To
- How are VDC subscriptions interpreted?
- Usage of Red Hat Unlimited Guest & VDC Subscriptions in Virtualized Clusters.
- Using RHEL Virtual Data Center Subscription [Master Article]
- How to list all ESX hosts that are attached to any Virtual Data Centre Subscription on the Satellite Server?
- Using RHEL subscriptions (2013 packaging): Scenario 5 - Virtual Datacenter
- How to retrieve a list of hypervisors having valid subscriptions attached in Red Hat Satellite 6 ?
- Registering virtual data centers with Red Hat
- How to utilize Activation Keys with Virtual Datacenter (VDC) Subscriptions
- Virtual Datacenter subscriptions & Microsoft Azure
- Associating Red Hat Enterprise Linux for Virtual Datacenters, Standard or Premium subscriptions with specific hypervisors registered to Red Hat Satellite 6.x
- Ensuring compliance with multiple Red Hat Enterprise Linux for Virtual Datacenters, Standard and Red Hat Enterprise Linux for Virtual Datacenters, Premium subscriptions under the same account
Q & A
- Are additional VDC Subscriptions required for Hypervisors with more than 2-sockets?
- This content is not included.Is it possible to use Virtual Data Center subscription with offline registration method?
- How does the 24 hour grace period for Virtual Datacenter Subscription work in Satellite 6.x?
- Why Virtual data Center subscriptions display "No repository content provided through subscriptions" on Red Hat Satellite 6 server?
- Is it possible to utilize Virtual Datacenter subscription on a cluster ?
Virt-who - General
Issues
- Virt-who fails with 'Cannot complete login due to an incorrect user name or password' error when configured with an Active Directory user account
- Red Hat Satellite's web UI is not displaying all hypervisors identified by Virt-who
- Virt-who service fails to start on Red Hat Satellite 6.x with a 'ImportError: cannot import name DependencyWarning' error
- Hypervisors are reported to Red Hat Satellite 6 with UUID when hostname based reporting is configured.
- Virt-who logs contain "Server error attempting a POST to /rhsm/hypervisors?owner=ORG&env=ENV returned status 500"
- Hypervisors tasks showing warning as result - undefined method `[]' for nil:NilClass
- virt-who fails to map host-guest details in Red Hat Satellite 6
- Virt-who takes a long time to report all host to guest mappings to Red Hat Satellite 6.
- Could not deploy Virt-who configuration on Red Hat Satellite using hammer.
- Virtual Machines are not mapped by Virt-who when virt-who configurations are created manually.
- The virt-who service is unable to report back a hypervisor which was deleted from Satellite UI in Red Hat Satellite 6
- [Red Hat Satellite-6.2] ERROR: Configuration file
.conf contains no section headers - Satellite 6 : virt-who is unable to send host-guest mapping data , fails with Error code 500
- Satellite shows 'This website is under heavy load' while processing virt-who's 'Hypervisor' task
- Guest has not been reported on any host and is using a temporary unmapped guest subscription
- Red Hat Satellite 6.x client status shows "Guest has not been reported on any host and is using a temporary unmapped guest subscription"
- Some host and guest mappings reported via virt-who do not update the Satellite
- Satellite 6 : virt-who fails with gaierror: [Errno -2] Name or service not known
- Dedicated virt-who server is not able to send data to a Red Hat Satellite
- virt-who error - Virt backend 'config' fails with exception:#012ReadTimeout: HTTPSConnectionPool
- Virt-who failed with Error"consumer no longer exists" during hypervisor checkin
How To
- How to configure virt-who with encrypted password?
- How to filter which hosts are sent by virt-who on Satellite 6.x?
- How to filter hypervisors by their hostnames using virt-who in Red Hat Satellite 6
- [Satellite6] How to configure single virt-who instance to support multiple organizations?
- Configuring virt-who to support a different proxy from Satellite
- How to check if virt-who server can connect to vCenter (or other hypervisors)?
Q & A
Video Guides
Virt-who in a VMware ESXi environment
Issues
- virt-who one shot gives the correct output but running a virt-who service fails to map the correct hyperviosr-guest.
- Virt-who parameters 'filter_host_parents' and 'filter_hosts' do not behave as expected when set in a single /etc/virt-who.d/virt-who-config-X.conf file
- Registering VMware ESXi Guests to the Red Hat Customer Portal using virt-who
- VMware RHEL virtual guest loses subscription during migration / fail-over to another VMware Hypervisor
- Virt-who is not reporting few ESXi hosts from vCenter Cluster
- virt-who reports a different UUID of ESX VM to Red Hat Satellite
- virt-who failed to register the VMware hypervisor "WebFault: Server raised fault: 'Cannot complete login due to an incorrect user name or password.'
- [Satellite 6] Virtual guest has an insufficient subscription status although it is a guest on a Hypervisor that has a proper RHEL for VDC subscription assigned
- How to deal with "Cannot complete login due to an incorrect user name or password" error of virt-who ?
- Troubleshooting "virt-who/vCenter" connection problems. "virt-who" can not perform hosts-to-guests mapping
- Host for ESXI hypervisors not created due to error Validation failed: Name has already been taken
- Virt-who Not Reporting Hypervisor and Guests Information
How To
- How to use a Microsoft Windows domain account with virt-who?
- How to use "virt-who" to register Esxi hosts with "Virtual Datacenter" entitlements ?
- How to Register VMware ESXi Guests to the Red Hat Customer Portal using virt-who
- How to configure virt-who for an ESX/ESXi host with RHSM?
- How to configure multiple VMware vCenter's by running virt-who in single RHEL instance?
- How to filter VMware clusters with virt-who?
- This content is not included.How to register a VMware ESX host/hypervisor on the Customer Portal to use virtual subscriptions
Virt-who in a Red Hat Virtualization (RHV) Environment
How To
- Configuration of virt-who to support Red Hat Virtualization
- How to configure virt-who for a Red Hat Enterprise Virtualization (RHEV) host
- How to configure virt-who in VDSM mode to work with RHEL-H or RHV-H?
- How to configure virt-who for RHV-M to report to Satellite 6
Virt-who in a Microsoft Hyper-V Environment
Issues
- System registration fails with error HTTPConnectionPool(host='169.xxx.xxx.xxx', port=80): Read timed out. (read timeout=10.0)
- Virt-who configurations for Hyper-V failing with UnicodeDecodeError on Red Hat Satellite 6
- virt-who cannot connect to Hyper-V, error "HyperVException: Communication with Hyper-V failed, HTTP error: 415"
- virt-who on HyperV fails with error "Invalid response (500) from Hyper-V"
- virt-who error configuring Hyper-V "Error when enumerating using root/virtualization namespace, trying root/virtualization/v2 namespace"
- Hyper-v VM does not have uuid set which breaks virt-who mapping
How To
- How to configure virt-who service to communicate with Hyper-V
- How to configure virt-who for a Microsoft Hyper-V host with RHSM?
- How to troubleshoot hyper-v with virt-who?
Q & A
- Is it possible to configure Virt-who for Hyper-V using a domain user account instead of a local user account on the hypervisor?
- Does Virt-who encrypt the communication between the Virt-who server and a Hyper-V hypervisor?
Virt-who in a KVM Environment
How To
Virt-who in a Nutanix AHV Environment
How To
- How to configure virt-who for Nutanix AHV to work with RHSM
- How to configure virt-who for Nutanix AHV to work with Red Hat Satellite Server
Related Topics
- Which hypervisors are certified to run Red Hat Enterprise Linux?
- This content is not included.Subscription-manager for the former Red Hat Network User: Part 3 - Understanding virt-who
Product(s)
Components
Article Type